DILUTING/reconstitute QUESTION!!!

[muscle_4you]

FIRST TIME IN USING IGF-LR3
THREE DIFFERENT BOTTLES ?
POWDER
ACID SOLUTION
SALINE/WATER? this one im not sure of....

NEED OPINIONS ON THE RIGHT WAY TO RECONSTITUTE.
HOW MUCH LIQUID AND ACID INTO THE POWDER??
1 VIAL IS 1000 MCG OR 1MG KIT..this is what i have....

 

[alan1973]

FIRST TIME IN USING IGF-LR3
THREE DIFFERENT BOTTLES ?
POWDER
ACID SOLUTION
SALINE/WATER? this one im not sure of....

NEED OPINIONS ON THE RIGHT WAY TO RECONSTITUTE.
HOW MUCH LIQUID AND ACID INTO THE POWDER??
1 VIAL IS 1000 MCG OR 1MG KIT..this is what i have....

acid and water?
I thought only BW was needed?
anyway,
when I did PEG MGF I used this protocol:
150mcg 2x per week. I added 1cc of BW to the 1000mcg of PEG MGF.
that means I inject 15IUs Sub Q each time
so if you are only doing 40mcg, you will inject 4 IU
Hope this helps with the math part.

 

[muscle_4you]

thanks ALAN

acid and water?
I thought only BW was needed?
anyway,
when I did PEG MGF I used this protocol:
150mcg 2x per week. I added 1cc of BW to the 1000mcg of PEG MGF.
that means I inject 15IUs Sub Q each time
so if you are only doing 40mcg, you will inject 4 IU
Hope this helps with the math part.

AS FOR THE MATH AND DOSES I GOT THAT DOWN.. BUT WHATS THE ACETIC ACID FOR?

THIS IS WHAT IV'E LEARNED, JUST NEED SOME OPINIONS...
THE ACID IS TO RECONSTITUTE AND THE WATER IS TO DILUTE....BECAUSE THE ACID IS USED TO SUSPEND/PRESERVE INTO LIQUID FORM AND WATER IS TO DILUTE THE ACID FOR A MORE COMFORTABLE INTERMUSCLAR INJECTION AND WATER IS ADDED IN EQUAL PARTS WITH ACID PRIOR TO INJECTION...

ANYONE OUT THERE CAN CONFIRM THIS?
THANKS IN ADVANCE!!!
NTR

 

[Zuke]

You need to put the AA in with the powder. Drop 1cc SLOWLY into the vial. Then GENTLY swirl it around and then BINGO, you are ready to go.

Then you pull the amount of BW that you want to dilute wiith into the syringe and then pull the IGF1. That way you are gonna make sure that you get all of it when you inject.


DO NOT OUT THE BW IN WITH THE POWDER!!!!!!!!!!!

 

[Alcatraz]

You need to put the AA in with the powder. Drop 1cc SLOWLY into the vial. Then GENTLY swirl it around and then BINGO, you are ready to go.

Then you pull the amount of BW that you want to dilute wiith into the syringe and then pull the IGF1. That way you are gonna make sure that you get all of it when you inject.


DO NOT OUT THE BW IN WITH THE POWDER!!!!!!!!!!!

Good Catch ZUKE!!!! You just saved a bro $120 or more.

As he said, you add the acid to the dry powder mix. Slowly. Let it dribble down the inside of the vial. Be careful, as the dry powder is in a vacuum. So when you put the needle in the bottle will SUCK the acid in very fast. So be ready to hold the plunger back and slowly let it trickle in. (You could also put a needle in first to release pressure. Up to you.)

As for the quantity of acid. If you add 1ml acid to the dry powder, you will then have 10mcg per IU on the syringe. So to measure 40mcg, you would draw in 4IU. BUT if you add 2ml of acid, this makes measuring a little easier. As each IU = 5mcg. So to get 40mcg you draw in 8IU. It is up to you, but I like to add 2ml to make the measuring easier, and you don't have to be as precise.

And last, just prior to injection you add the BW to dilute the injection so that the acid does not burn the muscles of your lab rat.

Good luck researching!!!

 

[muscle_4you]

THANKS GUYS !!!!!!one more thing.

HEY BRO'S THANKS FOR ALL THE HELP!!!
One more thing, I'll just add equal parts of water to acid prior to inj, because water vial is only the same amount..Is it going to burn with this formula?