DNP capping question?

[alpha6164]

I have got 5gr pouches of DNP and need to cap them. I have read for several days and have a pretty good grasp of the capping procedure mostly with the Cap-M-Quick setup. My question is mostly why everybody is choosing a size 0 capsule vs a smaller such as a size 1 or 2 which holds less powder. My line of thinking is that choosing a size 1 or 2 then you dont have to add any filler and just measure out ~250mg per capsule and not having to calculate and concerned about mixing filler and DNP etc.

Unless the DNP must be mixed with a filler to be ingested? All inputs appreciated. Thanks.

 

[ausbuilt]

the filler is just that- a product that is inert and takes up space; even pharma companies use them, otherwise their tabs would be tiny... and even small size 1 caps would be part empty..

it has nothing to do with ingestion.

It's easier to make a 50g batch of DNP to spread across all the size 0 caps then to try and dose 250mg into each capsule (what weigh out that small an amount of dry DNP and add by hand to each of 50 caps???). Its far more efficient to use the size 0, use 50g of powder overall (i.e DNP+filler) and spread across the cap-m-quick with the spreader.... have you actually capped DNP yet??

 

[willylee]

If your asking this question you really shouldn't be playing with DNP. If you want to use DNP find a board sponsor that carries the product. It's not like mixing Dbol or Winny and if you get a little off in your mixing you'll be fine. If you get a little off mixing your DNP you could be dead. If you still want to mix DNP do a google search for "geometric mixing technique."
Most reputable DNP suppliers use active ingredients as fillers. Not just inert product.


But hey! Those are just my $.02.