Here is my currant cycle
Weeks 1-15: test E 600mg/wk
Weeks 1-14: EQ 600mg/wk
Weeks 1-5, 16, 17: test P 100mg EOD
Weeks 10-15: Var 50mg/day
Weeks 16-19: 50mg clomid ED
Weeks 16-19: 40/40/20/20mg NolvaED
So my first injection in over 2 years could have gone a lot worse, but there are some things that I need to improve on!
Heres how I start,
I wiped my vials off with alcohol pads, then I added air to all 3 vials (prop, test E, and EQ). I switched needles every time. Would you say that's a good practice to get into? Our since I'm just injecting air it's ok to use the same needle for that?
Here is where I feel like I need some improvement/advice!
1.) Mixing oils in a syringe. This was the first time ever that I have done this. And even though I read all about it I still needed to do it first hand. I pulled the test out first. Went totally fine. But when I got to the EQ I pulled a little too much out so I pushed a little back in. Is that bad to do dude?? Because I don't want to cross contaminate them. So because of that I decided to just pull out the prop in it's own syringe..SoI ended up doing 2 shots. Need some pointers on this guys!
2.) Learning to inject again. So I had everything ready to go! I decided to start with my left glute. Did the prop shot. But I froze!!!! I don't know why!? I guess just being away for so long and crossing the AAS line again maybe. After about 20 sec of starring at the needle about to go in my glute. I finally injected it lol. Just nerves I guess..
It went in smooth. Those 25g are nice!! They don't hurt at all like the 23g! Aspirated it and everything. But at the end a little blood came back into the syringe. Is that ok?
The second shot if test/EQ went ok too.. Pinned on the same side I did the prop shot in. But I froze again! I need to relax! Anyway, was a little more effort to push the test/EQ in. After I pulled the needle out I noticed that the bottom of the needle looked wet! I'm thinking that some of the oil started to come back out!? Shit!!..Do you guys think I was pushing to fast/hard?
Plus I noticed a tiny bit of rubber floating around in one of my vials! But now I can't find it!
Just stressed that I fucked up my first shot bros!
Please help guys!
Weeks 1-15: test E 600mg/wk
Weeks 1-14: EQ 600mg/wk
Weeks 1-5, 16, 17: test P 100mg EOD
Weeks 10-15: Var 50mg/day
Weeks 16-19: 50mg clomid ED
Weeks 16-19: 40/40/20/20mg NolvaED
So my first injection in over 2 years could have gone a lot worse, but there are some things that I need to improve on!
Heres how I start,
I wiped my vials off with alcohol pads, then I added air to all 3 vials (prop, test E, and EQ). I switched needles every time. Would you say that's a good practice to get into? Our since I'm just injecting air it's ok to use the same needle for that?
Here is where I feel like I need some improvement/advice!
1.) Mixing oils in a syringe. This was the first time ever that I have done this. And even though I read all about it I still needed to do it first hand. I pulled the test out first. Went totally fine. But when I got to the EQ I pulled a little too much out so I pushed a little back in. Is that bad to do dude?? Because I don't want to cross contaminate them. So because of that I decided to just pull out the prop in it's own syringe..SoI ended up doing 2 shots. Need some pointers on this guys!
2.) Learning to inject again. So I had everything ready to go! I decided to start with my left glute. Did the prop shot. But I froze!!!! I don't know why!? I guess just being away for so long and crossing the AAS line again maybe. After about 20 sec of starring at the needle about to go in my glute. I finally injected it lol. Just nerves I guess..
It went in smooth. Those 25g are nice!! They don't hurt at all like the 23g! Aspirated it and everything. But at the end a little blood came back into the syringe. Is that ok?
The second shot if test/EQ went ok too.. Pinned on the same side I did the prop shot in. But I froze again! I need to relax! Anyway, was a little more effort to push the test/EQ in. After I pulled the needle out I noticed that the bottom of the needle looked wet! I'm thinking that some of the oil started to come back out!? Shit!!..Do you guys think I was pushing to fast/hard?
Plus I noticed a tiny bit of rubber floating around in one of my vials! But now I can't find it!
Just stressed that I fucked up my first shot bros!
Please help guys!
Last edited: