Help with Suspention clogging

[Gunsmith]

Hey fellas , I got a buddy that wants to trade me some suspention for some of my Sustanon , he's pissed cause it clogs a 22g pin and he keeps having to restick.

I was thinking about drawing up the 1cc of suspention and then 1cc of steril water to dillute it , my thinking is that the suspended material in twice the volume of water will be less likly to clog a pin?

What do you guys think?

How long is Suspention active in the body? I was thinking that I would just shoot it the morning on the day I'm gonna lift

 

[Enanthanator]

Heat it and shake it up that should help . Also you can lube up the needle just a little bit to help it flow better...half life of suspension is about 4 hours.

 

[ghostdog128]

your idea sounds good in theory the problem is the hormone particles are still the same size just suspended in more volume.. so you'll still clog the pin.. the suspension needs to be micronized.

Edit: but what enanthanator said should work for you.

 

[Ashop]

Heat it and shake it up that should help . Also you can lube up the needle just a little bit to help it flow better...half life of suspension is about 4 hours.

warming it a bit is the only thing I found helped.

 

[Gunsmith]

How warm , I always role my loaded pin back and forth im my hand till it warms the oil , seems to help it shoot a little faster.
Should it be warmed to say bath water temp under the sink or what.

Also , I've never used this one before and giving the short half life would it be best tm inject several hrs before a workout or after?

Oh Alin , bro I got some issues with my camera , I'll shoot you an E-mail concerning this

 

[Jerkyboy]

so how the heck can u micronize the powder? is there a filter or screen to push it thru to do this, or does the powder just have to be made that way?

 

[Steak Helmet]

Actually pulling back on the plunger each time it cloggs has worked well for my buddies.

 

[ghostdog128]

so how the heck can u micronize the powder? is there a filter or screen to push it thru to do this, or does the powder just have to be made that way?

it's easy to do although I've never done it with already made suspension where I had to filter out the hormone first to remake it.. Having the powder is the easiest way to start off.

you'll have to filter out your hormone out of the aqueous solution first , which in this case shouldn't be to hard since they are fairly large particles.. use a coffee filter like you where filtering tren. Let it dry for a few hours.. weight it so you can make your calculations. You'll need a recipe for suspension. If you don't have one PM me. Basically you'll brew it up like a normal home brew. Mix your PEG, PS80, BA and BB along with hormone.. heat until crystal clear then filter into your vial.. all of this needs to be done quickly or the heated solution will fall out of suspension and clog your filter instantly. you'll then reverse titrate your sterile and DISTILLED water into your vial. shake the hell out of it and presto you have a micronized solution.. there's more to it than that but that's the basic jist of it.

Edit: My "friend" has made it this way many times and it will flow throw a 27 guage without problem and is absolutely PAINFREE.

 

[km2000]

heat it on a candle warmer for 15 min, shake the bottle for 20 sec. pull the desired amount into a pin, pull 1/4 cc of b-complex or b-12 in there too (libes it) shake the syringe, and shoot it!