peptide injection problem????

wellsoci · May 12, 2011

Am I doing something stupid/idiotic? Why cant I pin myself correctly?! After the last couple of pins, the spot where I inject bleeds and bubbles up after I pull the pin out. The hard bubble under my skin eventually disappears, but then turns into a nice big bruise. Need help on my injections.....

Mota · May 12, 2011

Maybe if you explained how your doing it people could suggest what your doing wrong...

Otherwise you basically just want somebody to type out a subC injection procedure for you, if that's the case just google it.

wellsoci · May 12, 2011

Come on man, just need help on why this happens and want to prevent it in the future. Pinned myself the same way 100s times and sometimes it bleeds. Today, got my igf des pins from the freezer. Thawed them out then pinned both shoulders. After that they started to bleed and bubble up and will soon bruise. I know basic protocol on injections. Maybe air bubbles in pin???

Young Dunner · May 12, 2011

Sounds to me like you have some shitty pins and/or you're damaging the tip when you load them. Maybe.

wellsoci · May 12, 2011

U r probably correct. I have been trying to pin myself a couple of times using same syringe. I will start to use once and discard. Maybe the freezing of the pins damages the needles?

mace123 · May 12, 2011

wellsoci said:
Come on man, just need help on why this happens and want to prevent it in the future. Pinned myself the same way 100s times and sometimes it bleeds. Today, got my igf des pins from the freezer. Thawed them out then pinned both shoulders. After that they started to bleed and bubble up and will soon bruise. I know basic protocol on injections. Maybe air bubbles in pin???

Are the pins premixed and loaded when you pull them out of the freezer?

BigCountry · May 12, 2011

Every box/batch has a bad needle or to that is dull and hurts like hell; but it doesnt bubble up or bleed every time. I've bled on the sharpest needles. When you inject; go in fast. With a sharp downward motion; its less painfull-trust me on this. And you do less damage than when you go in slowly.

When you're in; pull back on the plunger a little. If you pull back on it and blood comes back into your syringe: Pull out and go to a different spot. If you see blood; you've knicked a blood vessel; and you will bruise.

Bubbles in your syringe do nothing to the average person. I leave a bubble between by GHPR/MOD in the syringe I take to work with me.

You may be a person who has alot of blood vessels near your naval. When my stomache starts to bruise up; I inject into my thigh. Just sit down and go straight in. Its actually less painfull for me to inject subq there than it is my stomache.

The only time I've ever had a little bubble is when I did 1ml of B-6/12 and that was because I went to fast.

MRABS · May 12, 2011

????? are you suggesting he freezes empty pins??

\

mace123 said:
Are the pins premixed and loaded when you pull them out of the freezer?

wellsoci · May 12, 2011

Thank u! Yes, the syringes are preloaded with Bac and des and frozen to keep the des good. Im thinking I just need to take more time pinning myself. U c at home I have the time to pin my ghrp/cjc. But with the des, I try to pin at gym since the des is short lived. So I do it quickly in order not to be caught...