Preferred needle size!

[Srave]

What's everyone using for needle size when running test? Needle size and length depending on body part?

 

[matthck]

I like 1"x 25 gauge. I warm up my gear on the coffee pot warmer for a bit ..., goes in like butter!!!


Sent from my iPhone using Tapatalk

 

[oxidedidmedirty]

I like the 25g 1 inch BD.
Used 23g for awhile which makes it go in a little quicker.
Really depends on if the oil is cottonseed or grapeseed.
which tends to be thicker.
so for thinner oils the 25g is better for comfort.

 

[thehazzle]

25 or 27 if shooting small amounts.

 

[lilgumby]

I use 23g pretty much everywher. I get 1 1/2 long so iI can use it in the quads and glutes then just put about a inch in for the delts

 

[wizim]

i used 1.5inch 23g guage for years. then i found 29gx1/2inch and havent looked back. only problem with these pins is volume. they are only 1ml

 

[zman12]

I have used 23g 1" for years usually use a 20g to draw with and warm up the syringe under hot water.

 

[Massthetics]

25g x 1.5in and 25g 5/8in

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[cardealer]

29 x1/2 slin pins

 

[Flexpack215]

25G x 5/8th is all I've ever needed for any AAS injection in any site. 1" and above are generally for fat people unless your really trying to get deep into a muscle like quads

 

[rGrimes]

27guage 1-1/4"

 

[j-pet]

I was sticking myself with 1.5 23" for years - 25" cause way less scar tissue fk knows why I didn't change earlier.

Low volume pinning also use backloaded slin pins.

 

[[email protected]]

I use one inch 22g to draw and to inject. Works great.

 

[stankyleg]

25G x 5/8th is all I've ever needed for any AAS injection in any site. 1" and above are generally for fat people unless your really trying to get deep into a muscle like quads

This

 

[way2tense]

i used 1.5inch 23g guage for years. then i found 29gx1/2inch and havent looked back. only problem with these pins is volume. they are only 1ml

29 x1/2 slin pins

slin pin is the way to go....I just started using em and it has made my life so much easier.

I had seen a lot of guys using slin pins and just thought it would never work/would take forever to actually get the oil in the muscle,but not so.

if you haven't tried it...you should.

as far as volume(only 1ml)it doesn't matter too much for me...I can go in the same muscle twice a week(probably more)with no problems.

 

[bbg420]

23 gauge to draw, 25 gauge to inject, use to use 18 gauge to draw, but they where tearing my vials stopper apart, just to big ,now I use 23 gauge and they work great

 

[wastedmuscle]

25g x 1inch to inject

 

[thethinker48]

slin pin is the way to go....I just started using em and it has made my life so much easier.

I had seen a lot of guys using slin pins and just thought it would never work/would take forever to actually get the oil in the muscle,but not so.

if you haven't tried it...you should.

as far as volume(only 1ml)it doesn't matter too much for me...I can go in the same muscle twice a week(probably more)with no problems.

Which muscle groups do you focus on with slin pins? Dunno how long you can rotate shoulders and maybe quads if lean.

Sent from my Nexus 6 using Tapatalk

 

[MonkeyBoy]

18 G to draw

23 G / 1 inch everywhere for me

 

[wargam19700]

20 to draw 25 to inject usually in quads.