Raw vs compound testing

[NaDa]

Alright, so im a new guy wading through this all. Dumb questions about testing. I see some places post their raw testing. For example, it shows like 98%. Others show compound (or mixed?) testing. For example 198.6, mg, on a 200mg, vial.

Correct me where I am wrong. Showing the raw testing, unless you are buying raws, is kind of useless. It doesn't mean they mixed the compound to that strength, correct?

 

[buck]

Can't say i have seen a lot of manufacturers showing their testing for their raws. Although i have not followed that a lot recently.Usually it is the finished product. If they do though show the raws testing, that will start to show how much contaminations there is to begin with.
For the individual resting raws will give them most all the data they need for their own use as log as they measure things correctly.

 

[hogan87]

For sources posting test results for raws, it will show that they actually have that powder in stock and the purity. A few shady spots ran out of things and just subbed in test, same compound different ester, etc. Some people selling finished products will also sell raws so that covers 2 bases.

If you are buying finished products, then yes seeing the test on that would be ideal. Others have had real primo (raw test would look good) and it was dosed like 30mg/ml on a 100mg/ml label.

 

[01dragonslayer]

Really the only true way to know if you have a legit authentic product is to test it yourself. Get bloodwork done, send in a sample to Janoshik yourself or both. That is the only way to have peace of mind. Anyone can post up testing results but do you know if those purity or concentration results are products from their inventory? The vial that they tested might be genuine but is that what YOUR getting? Or are those documents posted even authentic?....get it?

 

[hulksmash36]

^yes. Thats why having a legitimate and reputable source is key. Not just cheap.

 

[Splitzz]

Test Raws, Test finished product then make available for purchase.
Raw test we get to see the purity of the product being used. Some sources also have raws tested for heavy metals to go a step farther.