Tesosterone Suspension! Mixing Problem, Please Read!!

[BIGSHERM]

Alright here is the deal. I have a bottle of test suspension made by supra labs and also have a bottle of test susp(Anabolic TS) I had noticed when pulling the test from the supra that the liquid came in the syringe clear and not milky white, so i opened the bottle up and noticed that all the powder was all clumped up and sticking to the sides. So i poured it all out into a sterile bowl and also mixed the anabolic ts with it b/c that was clogging up too a little bit. I also added a little bit of Bact water to see if it would dilute some of the powder. I take my syringe and start to pull it out of the bowl so i can put it back into one of the bottles and when i did so little balls of powder would collect at the end of the syringe and nothing would come through!!!! Does anyone have any suggestions on what i could do to solve this problem??????? Thanks for any help!!!!


BS

 

[ken69dahl]

You need a bigger pin.

 

[fitnessbuff]

heat the pan.... till it melts.
That should work

 

[BIGSHERM]

The pin was 22g, so i thought that was big enough! I heated it and that didn't work either!!!

BS

 

[ken69dahl]

I guess shake the shit outta it, you don't want to go bigger than a 22 OUCH!

 

[BIGSHERM]

Yeah i don't know what the phuck is goin on with it. I let it sit for a while and some of the powder sank to the bottom like it should and some stayed at the top!!!!
I hate this!! I am going to have to make my own test suspended in water, if anyone can guide me in the right direction on doing this, please pm me!!! Thank you so much!!!


BS

 

[MikeS]

God, test suspension is such a pain! I heard the TS clogs and causes lumps at the injection site. IMO that makes it not worth it.
Use a bigger pin to draw (18g). Mixing with oils helps for some, and heating the syringe before injecting.

For the future: only use microrefined suspensions. The other shit is just not worth the time and pain. Ive heard Denkall is good shit (aquatest) from enough folks that I bought some for upcoming cycles. Certainly the Univet is good, kinda hard to get and expensive. Aquatest is good but low dose - 25mg/ml, and that makes it not worth it because of the volume youd have to inject.

 

[Dave_19]

Yeah i don't know what the phuck is goin on with it. I let it sit for a while and some of the powder sank to the bottom like it should and some stayed at the top!!!!
I hate this!! I am going to have to make my own test suspended in water, if anyone can guide me in the right direction on doing this, please pm me!!! Thank you so much!!!


BS

www.conversionboard.com, you will find out everything you need to know thier bro.