Needle question

[Techy]

Fixing to start 1st cycle. My needles are 30ga. 1/2 inch. Is this ok?

 

[BOOMSHAKER]

Are you sure you have a 30gauge?(slin pin) What exactly are you injecting?

For the most part 23g either 1/2 inch or 1inch is the normal. The gauge varies a little but very slightly, certainly not a 30g!

 

[Techy]

Yes, the're 30ga. insulin syringes

 

[elings]

Are you sure you have a 30gauge?(slin pin) What exactly are you injecting?

For the most part 23g either 1/2 inch or 1inch is the normal. The gauge varies a little but very slightly, certainly not a 30g!

I WOULD USE WHAT BOOMSHAKER SAID A 30G NEEDLE WOULD BE TO SMALL AND YOU WOULD NOT BE ABLE TO DRAW IT UP IN THE SYRINGE. I WOULD USE THE 23G 1/2 INCH FOR LEGS,SHOULDERS,AND BICEPS, AND USE 1 INCH AND 1/2 FOR THE GLUTES.

 

[JustWannaBeHuge]

me personally, I use a 25g. I have far less tissue damage when i started using that size. It may take longer to inject, but who cares, it's not a race. I wish that I used the 25 g (1 inch) from the get go.


JWBH

 

[Big A]

Go to www.howtodoinjections.com and you'll learn everything you need to know about injecting.

 

[K1]

I use 23g 1 1/2" for glutes and 25g 1" for everything else.........

 

[gettnlarge01]

Normally 23g 1'-1.5' for glutes and quads, 25g 5/8-1' for smaller muscles. What are you injecting?

 

[DOGMA]

This is what the begginer forum is for. Am I wrong????

 

[xcelbeyond]

Read this:
http://www.professionalmuscle.com/forums/showthread.php?t=1176