It's 100mg/ml I've tried heating it up in hot water in the microwaveWhat dose is it?
TNE is very hard to suspend in oil @ 100 mg/ml with out all the "special" solvents. The good news is that it is real as indicated by the flakes I would think.
It's 100mg/ml I've tried heating it up in hot water in the microwave here a picWhat dose is it?
TNE is very hard to suspend in oil @ 100 mg/ml with out all the "special" solvents. The good news is that it is real as indicated by the flakes I would think.
Sounds like a whatman .45 to the rescue!! Filter into a new vial too... the few days ordering the proper shit will save your health literally if there is an issue... get 2 filters just in case... once u filtered it do a crash test by putting oil in freezer if clouds crystalizes etc then gtg reheat/thaw and just reheat as needed if crashes again..That gear looks pretty dirty IMO. I've used a lot of TNE, that was always crystal clear at 100mg/ml.
I've had some crash even, and bring it back into solution with nothing more than 5 minutes over hot water.
That shit just doesn't look that clean.
Oven at 250-300 for 15-20min will cause less probs.. stove tops get extremely hot even on med or low and you dont want the oil heating over 300 since after 300 dif oils start to smoke at various temps above 300.. you dont heated oil to start smoking and cause vial to break... even if use a needle to vent gases.. once u get an oil to start smoking ur changing its chemical comp... if oven dont work then particles are def8nitely definitely contaminants that need to be filtered but id still question quality cuz particles could mean other things not visible like harsh chemicals or heavy metals may be present as well...before you filter it you need to heat it until clear.
put it right on your electric stove or if you have gas use a heavy bottom pan.
med/low heat, put the vial on cold and let it heat until clear, it will get very hot, you need tot heat it much hotter then what boiling water will achieve.
also filtering oils hot makes all the difference in terms of ease and your hands!
Oven at 250-300 for 15-20min will cause less probs.. stove tops get extremely hot even on med or low and you dont want the oil heating over 300 since after 300 dif oils start to smoke at various temps above 300.. you dont heated oil to start smoking and cause vial to break... even if use a needle to vent gases.. once u get an oil to start smoking ur changing its chemical comp... if oven dont work then particles are def8nitely definitely contaminants that need to be filtered but id still question quality cuz particles could mean other things not visible like harsh chemicals or heavy metals may be present as well...
I understand most oils smoke points are in the low/mid 400s but i said over 300.. 300 is just a safe margin IMO and an oven is a more controlled setting with less temp variance and just from when cooking ive seen olive and canola start to smoke in a pan just having on medium heat so not all stove tops are equal either i guess.. not like they are calibrated like a lab heat plate... if stove works for u great.. for stoves i personally prefer a boiling water bath and that worked great for about 7+ years of cookin my own tren from fina and comp th kits... also once i did have a vial fail over just plain stove burner.. coulda been a flawed vial but still enraging to watch a tren brew running all over the place on a not so sterile stove top to swear always do water bath from that day forward... otherwise i again personally prefer the oven as well as never had stopper issues, so the guy has proven options to chose from now at least..well 10+ years of using the stove has never caused me an issue...
what oils smoke point is 300?
even olive oil is ok to around there and I sure as shit hope ppl aren't using olive oil.
if the oil is smoking at that temp you have other shit in the oil.
I use oils with smoke point well above 400.
you should be able to hold the vial with your hands by the top at least.
I find baking leads to stoppers becoming brittle.
if you have to vent it, its too hot for too long anyway.
It's 100mg/ml I've tried heating it up in hot water in the microwave
It's 100mg/ml I've tried heating it up in hot water in the microwave here a pic