.gif "IP Gear")
Bro's
Anointed's doing a little diversifying into reasearch equipment and supplies. It will be a slow startup as most everything is going into other ventures. We will grow what grows and we will let die what doesn't. It will be about 90 days until I can get a new agent in the USA with useful machinery and supplies on the shelf.
In the meantime, I have my first machinery being manufactured in China the 25th of April and shipped shortly after that.
I have 2 machines obligated and will have 2 machines available for others.
Specifically designed for the capping of legal supplements using GMP by small-time labs. These machines are manual, portable, cap-size variable # 0 - # 3, with very nice hourly production capabilities. I think you will get excited about them as well if you have been looking for something above the small manual capsule trays, but couldn't afford the cost, size, and weight of the motorized models.
Manual Capsule Filling Machine:
Picture is Attached
Main Technical Specifications:
1.Overall Size: L*W*H= 232X547X353mm
2.Production Capacity: 400capsules/per time (about 2000-2400capsules/hour)
3.Applicable Capsule Model: 0, 1, 2, 3
4.Applicable Filling Model: Powder (including mixed compound medicine) small particle.
5.Weight: 14kg
$1400
1 year Guarantee
TERMS: Egold, 50% Down to put your name on it and the other 50% at the time of re-shippment from within the USA.
NOW HERES ANOTHER JEWEL FOR A SMALL TIME OPERATOR:
Electric Pilling Making Machine:
Picture Is Attached
The company successfully developed this small table-model machine and sweet-pill machine in the 1990' s. This machine overcame the defects of traditional pill-making equipment. This machine has features of high-efficiency, fine-effect, low-noise, non-polluting, simple-operation, safety, and high-realibility.
1.Structure: This machine is made up of flake pressing axis, strip-out axis, pill making axis, polishing canister, dried board, motor, and electrical equipment etc.
2.Working Principle: Put the mixture (the proportion of sweet and medicine is 1:1) as the agglomerate into the flake pressing slot to press, then take out of the flaking medicine to put into the strip slot, then thwart put the medicine strip into the pill making slot to make into pills.
3.Send the pilling into the polishing canister to polish and dry.
Main Technical Specifications:
Electric source: 110/220V 180W
Rotary speed: 1400r/min
Pill-making specification: 3-8mm
Weight: 30kg
Overall size: 650X270X 300mm
$1500.00
1 Year Guarantee
TERMS: Egold, 50% Down to put your name on it and the other 50% at the time of re-shippment from within the USA.
LOOKING FOR U.S. AGENT / PARTNER: If you would like to be involved in the company and can wait approximate 3 months to be recieving a profit then I would like to hear from you. What I envision is that you recieve the machinary and supplies all of which will be legal and then you store locally and re-ship to our US customers. After all program expenses you and I would do a 60/40 split of profit. I ask for 3 months as I would like to roll all profit back into inventory for the first 3 months. You would need to be honest and have at least a couple references from board members I know as well as no criminal record.
Anointed
[email protected]
Anointed's doing a little diversifying into reasearch equipment and supplies. It will be a slow startup as most everything is going into other ventures. We will grow what grows and we will let die what doesn't. It will be about 90 days until I can get a new agent in the USA with useful machinery and supplies on the shelf.
In the meantime, I have my first machinery being manufactured in China the 25th of April and shipped shortly after that.
I have 2 machines obligated and will have 2 machines available for others.
Specifically designed for the capping of legal supplements using GMP by small-time labs. These machines are manual, portable, cap-size variable # 0 - # 3, with very nice hourly production capabilities. I think you will get excited about them as well if you have been looking for something above the small manual capsule trays, but couldn't afford the cost, size, and weight of the motorized models.
Manual Capsule Filling Machine:
Picture is Attached
Main Technical Specifications:
1.Overall Size: L*W*H= 232X547X353mm
2.Production Capacity: 400capsules/per time (about 2000-2400capsules/hour)
3.Applicable Capsule Model: 0, 1, 2, 3
4.Applicable Filling Model: Powder (including mixed compound medicine) small particle.
5.Weight: 14kg
$1400
1 year Guarantee
TERMS: Egold, 50% Down to put your name on it and the other 50% at the time of re-shippment from within the USA.
NOW HERES ANOTHER JEWEL FOR A SMALL TIME OPERATOR:
Electric Pilling Making Machine:
Picture Is Attached
The company successfully developed this small table-model machine and sweet-pill machine in the 1990' s. This machine overcame the defects of traditional pill-making equipment. This machine has features of high-efficiency, fine-effect, low-noise, non-polluting, simple-operation, safety, and high-realibility.
1.Structure: This machine is made up of flake pressing axis, strip-out axis, pill making axis, polishing canister, dried board, motor, and electrical equipment etc.
2.Working Principle: Put the mixture (the proportion of sweet and medicine is 1:1) as the agglomerate into the flake pressing slot to press, then take out of the flaking medicine to put into the strip slot, then thwart put the medicine strip into the pill making slot to make into pills.
3.Send the pilling into the polishing canister to polish and dry.
Main Technical Specifications:
Electric source: 110/220V 180W
Rotary speed: 1400r/min
Pill-making specification: 3-8mm
Weight: 30kg
Overall size: 650X270X 300mm
$1500.00
1 Year Guarantee
TERMS: Egold, 50% Down to put your name on it and the other 50% at the time of re-shippment from within the USA.
LOOKING FOR U.S. AGENT / PARTNER: If you would like to be involved in the company and can wait approximate 3 months to be recieving a profit then I would like to hear from you. What I envision is that you recieve the machinary and supplies all of which will be legal and then you store locally and re-ship to our US customers. After all program expenses you and I would do a 60/40 split of profit. I ask for 3 months as I would like to roll all profit back into inventory for the first 3 months. You would need to be honest and have at least a couple references from board members I know as well as no criminal record.
Anointed
[email protected]
