First timer on HGH 1 qestion.

[Mr Anderson]

Ok so my HGH Saizen 24ui 8mg per vial just came in and im ready to start mixing it up. I have 100 unit slin pins,

How do i work out how many units i need to inject, I want to be on 3iu per day.



so if i was to mix 1ml bac water that would = 24iu's so 1 ui is = 4.16 units.

so i should take 12.5 units per day ?

Cheers guys.

 

[wasp]

.8 water, each .1 will be 3 ius

 

[Mr Anderson]

.8 water, each .1 will be 3 ius

So would i be right ?

 

[nozeryder]

You need to mix more than 1cc of water for 24ius. Less water equals a higher concentration of growth per amount of fluid. Why stress over drawing that last drop of fluid in the bottle and what's left in the pin, or if you accidentily squirt a little out of the syringe, or when some fluid comes back out of your body after you pull the pin out. If the gh is more diluted you don't risk losing as much for ANY reason.
Mix 2.4 cc's of BW so that every 10 mark on your slin pin will equal 1 iu of gh.
General rule, 1 cc of BW for every 10ius of gh.
30 mark on your pin will equal 3 ius.

 

[Mr Anderson]

You need to mix more than 1cc of water for 24ius. Less water equals a higher concentration of growth per amount of fluid. Why stress over drawing that last drop of fluid in the bottle and what's left in the pin, or if you accidentily squirt a little out of the syringe, or when some fluid comes back out of your body after you pull the pin out. If the gh is more diluted you don't risk losing as much for ANY reason.
Mix 2.4 cc's of BW so that every 10 mark on your slin pin will equal 1 iu of gh.
General rule, 1 cc of BW for every 10ius of gh.
30 mark on your pin will equal 3 ius.

Now thats something i can understand thank you

 

[wasp]

You need to mix more than 1cc of water for 24ius. Less water equals a higher concentration of growth per amount of fluid. Why stress over drawing that last drop of fluid in the bottle and what's left in the pin, or if you accidentily squirt a little out of the syringe, or when some fluid comes back out of your body after you pull the pin out. If the gh is more diluted you don't risk losing as much for ANY reason.
Mix 2.4 cc's of BW so that every 10 mark on your slin pin will equal 1 iu of gh.
General rule, 1 cc of BW for every 10ius of gh.
30 mark on your pin will equal 3 ius.

had no idea 2.4 cc would fit in vial, i did think of this

 

[nozeryder]

had no idea 2.4 cc would fit in vial, i did think of this

Shoot, didn't think about bottle size. Never even seen a bottle of Saizen.

 

[Mr Anderson]

Shoot, didn't think about bottle size. Never even seen a bottle of Saizen.

Yes 2.4ml bac water will fit into the siazen vials thanks again

 

[Mr Anderson]

Shoot, didn't think about bottle size. Never even seen a bottle of Saizen.

I have notice today after the second pin that there is a slight sting when i am injecting the growth, is this normal ?

 

[juicin]

I have notice today after the second pin that there is a slight sting when i am injecting the growth, is this normal ?

i know people using generic blue tops often get welts at the injection site...

Ive heard folks say that the cheaper it is the more apt it is to produce a welt, dont know the truth to that statement but it does sound like an overgeneralization to me.

 

[wasp]

i get them from time to time, sometimes nothing, even with greens


but i got em with hcg too, i dont pay it any mind


never a thing with im so, im guessing its just like a reaction to a bug bite

 

[Mr Anderson]

Not getting any welts at all just stings a bit when I'm pressing the plunger down.