Liquid Aromasin Issue - Bad Batch?

nakedsoul · Aug 17, 2016

I got some liquid Aromasin from Evo and there appear to be flakes in the bottles as if it is not dissolving properly.

I have heard about people heating it up, but I expected it would come fully dissolved. No matter how much I shake it up... there are still flakes.

I picked up a measuring dropper from the pharmacy to be sure I am getting the proper amount. However... if there are flakes of aromasin in the bottle, it would seem impossible to get an accurate dosage.

Anyone else have this issue?

heavyhitter · Aug 17, 2016

It really shouldnt matter much. Its a powder suspendd in a liquid. It happns sometimes

Humana Life Group · Aug 17, 2016

If you want it clear, place on stove at medium low temp and watch closely don't walk away. do not use high temp if the maker uses everclear you can't let that boil or you lose all of it. So keep an eye on it and let it heat slowly and it will dissolve. Just because it "fell out" a little bit DOES NOT MEAN IT IS BAD!!! I'd just use it as is. That's just me. It'll still work.

nakedsoul · Aug 20, 2016

Thank you for the replies.

The problem for me is that I only need a very small dose. I was taking 12.5mg every 2 - 3 days and it was a bitch trying to split the pills. That is why I decided to get the liquid.

With such a low dose, I feel like it needs to be fairly accurate. Using the liquid daily, it ends up being just a few drops.

I am thinking of going back to arimidex and trying .25mg E3D and see what that does for me. I only need to bring down my E2 just a bit. My E2 before using the Aromasin was 43. Since my body seems ultra sensitive, I think I do better in the low 20s.