Question on Stealth products

[assapopolis]

For anyone who has used them. They say draw all the contents into a pin and keep in there. Does the loaded pin need anything special like temperature, humidity stuff like that?
What would be wrong with putting a drop of superglue on the pin hole and just keeping it in the sachet. Then poking it in a different spot next time?

Thanks for any info!!

 

[engbulldog]

the last time i kept test in a pin for a length of time the black rubber stopper started to disolve and it had to but thrown away!!! Just order a few sterile 20ml bottles from the net and transfer from one to the other and you could also cut it w/sterile oil check back a few posts on grapeseed oil for more info Good Luck

 

[rubdub]

the last time i kept test in a pin for a length of time the black rubber stopper started to disolve and it had to but thrown away!!! Just order a few sterile 20ml bottles from the net and transfer from one to the other and you could also cut it w/sterile oil check back a few posts on grapeseed oil for more info Good Luck

Yep. I would spend the few bucks and get a few sterile vials and transfer. It takes a little while but much easier once it's done.

The vials run about 1-2 bucks each and you only need a couple. JMO.

 

[dr.tooth]

yeah, dont be cheap and spend a little money to help prevent any infection. you can get sterile oil from one of the sponsors on the board to help cut it!!

 

[Ashop]

For anyone who has used them. They say draw all the contents into a pin and keep in there. Does the loaded pin need anything special like temperature, humidity stuff like that?
What would be wrong with putting a drop of superglue on the pin hole and just keeping it in the sachet. Then poking it in a different spot next time?

Thanks for any info!!

All AAS should be stored at room temp in dark, dry area. Vials are very cheap to transfer your Stealth items into. Check board sponsor: www.kaotikchemistry.com