BD gear question.

terryd5150 · Nov 6, 2005

I've got some gear than is causing me some pain after injecting. I'm used to having some pain as I use a good bit of sustanon 250 but I have some deca and test enth from BD and both are causing more discomfort than the sust. Both the deca and test are dosed at 250 mg/mL. Could the pain be coming from the BA needed to hold them at this dose? Anyway, would baking these vials with a vent pin help? And what temp should I use? I read some suggestions of 250 and 275 for 20 min then cooling for 20 min and repeating the cycle three times. Also, would these temps melt the rubber stoppers on the vials? I know that I have a lot of dumbass questions about baking but I have never tried it and I was wondering if any of you guys had any experience with it.

Thanks

xcelbeyond · Nov 6, 2005

Here's my $0.02

Doing the baking/cooling cycle you described is to "help" kill bacteria/sterilze.

This temp (250 F) will not destroy the septum. The only way you're gonna begin to get rid of BA is if you have a vent pin in the vial. I really don't know if people who try this really get rid of BA or not. Since this is a pharm-grade product, I doubt that it has "too much" BA. So if you did manage to burn some off, the hormone would not stay suspended?!?

bigbaldbulldog · Nov 6, 2005

xcelbeyond said:
Doing the baking/cooling cycle you described is to "help" kill bacteria/sterilze.

This temp (250 F) will not destroy the septum. The only way you're gonna begin to get rid of BA is if you have a vent pin in the vial. I really don't know if people who try this really get rid of BA or not. Since this is a pharm-grade product, I doubt that it has "too much" BA. So if you did manage to burn some off, the hormone would not stay suspended?!?

No other thoughts ot thinsg to say to that...Excel said it all...again

EnglandXXL · Nov 6, 2005

Hey Bro,

Drop me a pm as to where you got your gear from! But, I am using Enth ans Deca from BD as well - and I have not had any discomfort at all! And I am doing 1500mg Enth ew and 900mg Decabol ew. Also, just to note that deca num's the injection site - thats why people - when mixing gear in a syringe - suck the Deca last!

If your going to boil off the BA... make sure you use a 18ga needle and stick it in the septum to prevent pressure build up! Just a special not to remember - make sure the needle point is not submerged in the oil!

Cheers
E

terryd5150 said:
I've got some gear than is causing me some pain after injecting. I'm used to having some pain as I use a good bit of sustanon 250 but I have some deca and test enth from BD and both are causing more discomfort than the sust. Both the deca and test are dosed at 250 mg/mL. Could the pain be coming from the BA needed to hold them at this dose? Anyway, would baking these vials with a vent pin help? And what temp should I use? I read some suggestions of 250 and 275 for 20 min then cooling for 20 min and repeating the cycle three times. Also, would these temps melt the rubber stoppers on the vials? I know that I have a lot of dumbass questions about baking but I have never tried it and I was wondering if any of you guys had any experience with it.

Thanks

bigbaldbulldog · Nov 6, 2005

EnglandXXL said:
Hey Bro,

Drop me a pm as to where you got your gear from! But, I am using Enth ans Deca from BD as well - and I have not had any discomfort at all! And I am doing 1500mg Enth ew and 900mg Decabol ew. Also, just to note that deca num's the injection site - thats why people - when mixing gear in a syringe - suck the Deca last!

If your going to boil off the BA... make sure you use a 18ga needle and stick it in the septum to prevent pressure build up! Just a special not to remember - make sure the needle point is not submerged in the oil!

Cheers
E

I am pretty sure you can not ask in teh open forum where one gets gear.. and i am sure you can not solicate that kind of info... Be careful who and what you ask for in the future...this isn't Vitaman C you are asking for

Strunk · Nov 6, 2005

bigbaldbulldog, England wasn't asking for him to post the info in the open forum...he asked to PM him. England doesn't need any help locating BD gear. Not many people here at Promuscle know who England is.

bigbaldbulldog · Nov 7, 2005

Strunk said:
bigbaldbulldog, England wasn't asking for him to post the info in the open forum...he asked to PM him. England doesn't need any help locating BD gear. Not many people here at Promuscle know who England is.

Hi strunk... Nice to meet ya buddy... I understand he wasen't asking for an open post but asking for a source in teh open forum is like telling everyone you want to order steroids and not a good move in todays climate IMHO.. I see it is Englands first post here but comes from another board and we are glad to ahve him here and lok foreward to learnign from here...

I just did not want to see him get off on teh wrong foot here and was trying to save him a alittle grief that may coem his way by asking for a another memebers source and supply line thats all..

best of luck to you and hope to see more of you here...BBB

PHIL HERNON · Nov 7, 2005

OH COME ON BBB

bigbaldbulldog said:
I am pretty sure you can not ask in teh open forum where one gets gear.. and i am sure you can not solicate that kind of info... Be careful who and what you ask for in the future...this isn't Vitaman C you are asking for

THIS GOES AGAINST EVERYTHING YOU AND I WANT AMERICA TO BE. FREE!! ENGLAND WASNT DOING ANYTHING WRONG, AND IF HE WAS, WHO CARES, RIGHT?? LIVE AND LET LIVE. BTW, WHEN YOU COMING TO VISIT ME? I NEED TO SEE YOUR PROGRESS.

Wolfpack · Nov 7, 2005

bigbaldbulldog said:
Hi strunk... Nice to meet ya buddy... I understand he wasen't asking for an open post but asking for a source in teh open forum is like telling everyone you want to order steroids and not a good move in todays climate IMHO.. I see it is Englands first post here but comes from another board and we are glad to ahve him here and lok foreward to learnign from here...

I just did not want to see him get off on teh wrong foot here and was trying to save him a alittle grief that may coem his way by asking for a another memebers source and supply line thats all..

best of luck to you and hope to see more of you here...BBB

I believe England's an owner of one of the board sponsors, Genxxl, and was probably checking to see if that's where he got it. But I could be wrong.

bigbaldbulldog · Nov 7, 2005

OUCH BABY BIG OUCH!!!

PHIL HERNON said:
THIS GOES AGAINST EVERYTHING YOU AND I WANT AMERICA TO BE. FREE!! ENGLAND WASNT DOING ANYTHING WRONG, AND IF HE WAS, WHO CARES, RIGHT?? LIVE AND LET LIVE. BTW, WHEN YOU COMING TO VISIT ME? I NEED TO SEE YOUR PROGRESS.

WOW.. i was just hoping to avoid seeign someone else from this community going to jail ...that was all...I am all about freedom big guy as you know i just hate to see someone invite the loss of it by asking for a source on a open forum.. but i guess it's okay since i am the only one who thought it was weird to see it...

Infact i remember asking a person or two in a PM if they could help me or point me in the right direction about 2 years ago and i got a very harsh PM from moderator telling me " if i continue to ask for sources i will be banned from this baord"...

You may be seeign me Tommorow(Monday) if i take a day off from school.. i have 3 test this week and 2 papers due..

PHIL HERNON · Nov 7, 2005

I KNOW

bigbaldbulldog said:
WOW.. i was just hoping to avoid seeign someone else from this community going to jail ...that was all...I am all about freedom big guy as you know i just hate to see someone invite the loss of it by asking for a source on a open forum.. but i guess it's okay since i am the only one who thought it was weird to see it...

Infact i remember asking a person or two in a PM if they could help me or point me in the right direction about 2 years ago and i got a very harsh PM from moderator telling me " if i continue to ask for sources i will be banned from this baord"...

You may be seeign me Tommorow(Monday) if i take a day off from school.. i have 3 test this week and 2 papers due..

BUT HE ASKED FOR A PM ABOUT IT. ALSO, YOU ARE NOT ENGLAND. I THOUGHT YOU SHOULD KNOW WHO THAT IS, BUT I SEE YOU DONT. HOPE TO SEE YOU SOON BBB, TAKE CARE.

terryd5150 · Nov 7, 2005

PHIL HERNON said:
THIS GOES AGAINST EVERYTHING YOU AND I WANT AMERICA TO BE. FREE!! ENGLAND WASNT DOING ANYTHING WRONG, AND IF HE WAS, WHO CARES, RIGHT?? LIVE AND LET LIVE. BTW, WHEN YOU COMING TO VISIT ME? I NEED TO SEE YOUR PROGRESS.

It's a shame that Phil Hernon finally posts a reply on one of my threads and it has nothing to do with my thread starter! LOL

da_Fonz · Nov 7, 2005

Wolfpack said:
I believe England's an owner of one of the board sponsors, Genxxl, and was probably checking to see if that's where he got it. But I could be wrong.

England is not an owner but an admin of the board genxxl and the person i report to everyone. And yes he didnt ask for the info to be posted in the open but rather in a PM. nothing wrong with that. He is making sure that its not coming from us, plain and simple.

bigbaldbulldog · Nov 7, 2005

da_Fonz said:
England is not an owner but an admin of the board genxxl and the person i report to everyone. And yes he didnt ask for the info to be posted in the open but rather in a PM. nothing wrong with that. He is making sure that its not coming from us, plain and simple.

Thanks for pointing out guys that i was totally wrong.. i'll keep my mouth shut for now on..

..

da_Fonz · Nov 7, 2005

No, by all means voice your opininon you have a right to but i figured you should know who E is since most here do not.

Maverick · Nov 7, 2005

I believe this is the first time I have heard anybody say anything even remotely negative about British dragon products. From what I understand (I havent ever used them) They are top notch and some of the best out there.

Mav