Post-Cycle Clomid Therapy

[xcelbeyond]

Starting post-cycle clomid therapy depends on what steroid was used during the cycle. Different steroids have different half lifes and beginning clomid intake should be adjusted accordingly. If clomid is taken when androgen levels in our body are still high, it will be a waste. You need to wait for androgen levels to fall before implementing clomid therapy. However, if you wait too long you could possibly lose gains. Look at the list below to determine when you should start clomid therapy. List all the steroids used in your cycle and which ever one has the latest starting point then go with that. For example, if cycle consisted of dbol, sustanon and winstrol, use cessation of sustanon to determine when to begin clomid as it remains active for the longest period of time.

Anadrol/Anapolan: 8 - 12 hours after last administration
Deca: 3 weeks after last injection and clomid for 4 weeks
Dianabol: 4 – 8 hours after last administration
Equipoise: 17 – 21 days after last injection
Fina: 3 days after last injection
Primobolan depot: 10 – 14 days after last injection
Sustanon: 3 weeks after last injection
Testosterone Cypionate: 2 weeks after last injection
Testosterone Enanthate: 2 weeks after last injection
Testosterone Propionate: 3 days after last injection
Testosterone Suspension: 4 – 8 hours after last administration
Winstrol: 8 – 12 hours after last administration

Use Clomid at 300mgs on first day of administration. Split this up 2 tabs (50mg ea.) 3 times a day. After first day, use 100mgs (one tab, 2 times a day) for 10 days and then followed by 50mgs for 10 days.

xcel

 

[moose]

This has worked well for me xcel, I am just finishing up my therapy, and I'm maintaining my gains well.

 

[ana_11]

not 4me

mate it didnt work 4me ,i dont know ???? i went to do my blood test last week it was the 4th week after starting clomid (4 days since the last tab i took) but its the 1st time im doing post cycle test every thing was ok exept my testo level was at 3 and the norm is 6-30 so im pissed off a lot ,i didnt have axcess to hcg so i tried just clomid ,do u think i should use some hcg to kick it up or leave it to nature or ooooooooooops what ive done!!!!

by the way im 28 and thats my 10th cycle and it was moderate to low dose (winny300,prop300,eq200,deca100)/w for 9weeks its nothing...........help

 

[xcelbeyond]

Read this before you do hcg post cycle: http://www.professionalmuscle.com/forums/showthread.php?threadid=1190

There is also a gainskeeper formula posted, but it's quite extensive - probably a lot more expensive than your cycle was.

xcel

 

[ana_11]

thx

cheers man ive just checked it out its gr8.

 

[xcelbeyond]

^

 

[ALLRIPPEDUP]

Excel - I start clomid tomorrow (1/29). It came in powder form with an extremely small scoop. I am estimating that the scoop is probably equivalent to a 50mg tab. Any idea?

 

[xcelbeyond]

I don't know what clomid will dissolve in. My "guess" is grain alcohol - but I really don't know. Here is an idea of the numbers to dissolve: 10cc of liquid + 500mg powder = 50mg/ml

You should post this question on the main board as I'm sure someone knows what to use to dissolve it.

If you have a digital scale that's capable of measuring in 10mg (or less) increments (50mg increments is not accurate enough), then you could weigh it out. It'd be much simpler to make a solution.

xcel

 

[ALLRIPPEDUP]

Thanks Excel. Another question (please excuse my ingnorance - it was my first cycle); Can I simply ingest one scoop of powder without having to dissolve it?

 

[xcelbeyond]

Sorry - I just saw this

Thanks Excel. Another question (please excuse my ingnorance - it was my first cycle); Can I simply ingest one scoop of powder without having to dissolve it?

If you have a microscoop (they're EXTREMELY small), a level scoop is probably about 300 mg (just a GUESS) so you can imagine how difficult (Read: EXPENSIVE measuring equipment) it would be to measure a 50mg dose!