Buy Needles And Syringes With No Prescription
M4B Store Banner
ddd
Riptropin Store banner
Generation X Bodybuilding Forum
Buy Needles And Syringes With No Prescription
Buy Needles And Syringes With No Prescription
Mysupps Store Banner
IP Gear Store Banner
Anabolic Hormones Store Banner
Ganabol Store Banner
Spend $100 and get bonus needles free at sterile syringes
Professional Muscle Store open now
LandmarkChem Email Banner
Medtech Store Banner
Bruce Labs Store banner
advertise on professional muscle millions of hits per month
Professional Muscle Store open now
over 5000 supplements on sale at professional muscle store
over 5000 supplements on sale at professional muscle store
over 5000 supplements on sale at professional muscle store
over 5000 supplements on sale at professional muscle store
over 5000 supplements on sale at professional muscle store
over 5000 supplements on sale at professional muscle store

Some lingering GH questions

Roach

New member
Newbies
Joined
Jul 12, 2010
Messages
37
So some of these may be off the wall or painfully dumb but I figure besides the ridicule, whats there to lose :)

1. When mixing bac water with GH, Im using a 10ml syringe, unsure of the gauge but it is what I used for a test/deca cycle a few years back. Im taking 1ml out water out and putting into a 10iu vial. Is this correct? (the syringe, not the amount of water which I know is fine)

2. Since its just bac water, I have reused the syringe mentioned above for 10 vials (a whole kit) before moving to a new one. I didnt see any issues but again, is this okay?

3. Recently I moved to 6iu/day at once and since I have a 10iu vial, it doesnt work out perfectly (like it did at 5iu) so... I took 3 vials, put water in each (see #1), and then took a 29g pin and combined it into a single vial, which now had 30iu (5 day supply). Since its all from the same place, I didnt see any issues?

4. Does the bac water need to stay in the fridge? Or does it not mater if in room temp?

5. I got 10kits and immediately after getting package the entire thing went in my fridge in powder form. Every few days I will mix them (max 5 days in advance). So they are pretty much in the fridge box mixed and in powder. Any issues here?

6. Is there ever a reason besides minimizing sides, to split my pins to 2x a day, instead of just 1x in the morning. IE more effective?

7. The stuff I have sometimes has vacuum and sometimes doesnt but when I mix I generally angle the larger gauge pin so its not going directly on the powder. I then roll in the palm of my hand or lightly shake almost as if Im stirring something. This is the correct procedure right? Do I need to get all the vacuum out or as long as its not directly on it, ok?

I think thats it. Im fairly confident Im doing everything correctly but wanted to be on the safe side. My progress as slowed down recently so Im 'pulling out all the stops' to make sure its not an issue of how Im doing things

Thanks guys :)
 
Last edited:

LeanMachine

New member
Registered
Joined
Jan 20, 2011
Messages
73
#1 Yes, I also re-use a 23ga 3cc syinge to reconstitute the HGG. I swab the pin and the BS water with alcohol first then fill it 1ml of BS water. I hold the syringe in the HGH vial and let the vacuum slowly dribble BS water into the vial then gently swish the vial until it is clear liquid. Then I let the remaining vacuum out by removing the syringe from the pin.

#2 As long as you swab the 3cc pin and the top of the BS water vial you should be fine.

#3 Nope

#4 No, I keep my BS water stored at room temp

#5 Nope

#6 If you don't mind pinning 2x day that will provide more stable levels and reduce sides (I am prone to bad CTS). I pin the HGH early morning 15 min after my GHRP-6 + CJC-1295 and the same protocol again pre-bed.

#7 See #1 - I have read that sometimes there is no vacuum but my green tops always do

Sounds good Bro... Good Growing!
 

LeanMachine

New member
Registered
Joined
Jan 20, 2011
Messages
73
One other thing... I linke to pin the HGH with a 100iu 30ga slin pin. Each 10 on the syringe is 1IU. Makes the math really simple for me :)
 

Forum statistics

Total page views
499,943,058
Threads
123,006
Messages
2,333,331
Members
154,872
Latest member
Bigmac7486
Top