My test e powder melted and turned a dark reddish brown. I mixed and filtered it but it's still a dark brown. Has anyone had a similar problem. Was the test still good or can it be refiltered?
This happened to me recently.
The test seems to be working but it hurts a lot more than before it melted and changed colour. I get a bit of painful swelling after injecting that lasts about 48hrs.
I think I read somewhere that it is impurities left over from the manufacture process that degrade and turn brown, not the test E itself.
is there a site that still has a step by step suspension procedure i remember one i think called blue 6 but its gone. or just step by step instructions? thanks
nope. Came as a powder and I left it in the closet since I was running test cyp. A couple months later it had melted. (summer time no a/c) I found it melted in the ziploc and then transferred it to a vial. I figured filtering would remove the impurities. I ran it throuh a .2 whatman and the same dark color remained.
Its happens !
I also depends what type of oil you used.
I've over heated grape seed oil and it will turn a amber color.
No big deal as long as you filtered it properly.
What is you recipe ?
I'll be very interested to hear what happens with this. the OP said he did not heat it, or refridgerate it. "Dark Reddish Brown" sounds contaminated to me...or it has oxidized some way other than heating.