My First Conversion : Confusion

yardrock · Feb 28, 2006

Well my first shot at home brewing was a cluster fuck. Was trying to convert 20 grams of Stanzo(winny) into 200ml at 100mg.
Put powder and solvents into beaker and heated until it turned nice and clear yellow. When I stuck a 20cc syringe into it to draw up to filter into vials, the plastic tip melted. Also the rubber stopper started to melt. I tryed again letting cool a little longer but started to crystalize in beaker and in syringe. Would not pass thru filter.
I was able to save some of it and heated in another beaker. Added distilled water and then transfered into vials. Now I have about 80ml of unfiltered product that I have no idea how many mg per ml. I will try Tren and Test E next.

Got Juice · Feb 28, 2006

wow that sounds pretty shity man

.... hopefully your next batch goes a little smoother.. i have never made any of my own stuff, im a little scared of that happening.

Armageddon · Feb 28, 2006

Why not make winny into an oral solution? No need for another poke

dolf · Feb 28, 2006

let the solution cool some before drawing out of beaker. not cold but not so hot itll melt the syringe.

tattoojr · Feb 28, 2006

From What I've seen Winny is hard to keep suspended espescially over 50mg/ml. I've had some 75mg/ml in oil that cyralized and all I do is heat a little and use it as an oral. J.R.

HELLA SWOLE · Feb 28, 2006

I don't believe winny should be suspended any higher than 50mg/ml. WHere di dyou read otherwise?

xcelbeyond · Feb 28, 2006

The ONLY luck I ever had with winny is using KC's easykit in PEG. It'll do 100mg/ml painless and will easily go through a 25g pin.

The liguid was TOO HOT in your first attempt to filter. It'll aid in ease of filtering if it is "warm." You can also ruin the filter if the solution is too hot.

yardrock · Feb 28, 2006

xcelbeyond said:
The ONLY luck I ever had with winny is using KC's easykit in PEG. It'll do 100mg/ml painless and will easily go through a 25g pin.

The liguid was TOO HOT in your first attempt to filter. It'll aid in ease of filtering if it is "warm." You can also ruin the filter if the solution is too hot.

That is what happened. I ruined the filter and when the filter got jamed up, I pushed on the syringe plunger and the hot oil passed thru the stopper and burnt and came out the wrong side and my hand. Will try again.