can i make transdermal from tren/prop in oil

[redneckrz]

heres what i did.i made my own kit.1cc/ba,10cc/guaiacol,10cc/bb.4000mg.tren,10gram/testprop.the rest oil.total 60cc of preperation,and filtered with a 45um.
now heres the problem-i feel like i got hit with a baseball bat with in hours of inject.
so now im thinkin can i use like dmso with 1cc of preperation?
holycrap that inject hurts.i cant see doin this 4 the next 10wks.

 

[Kev 245]

heres what i did.i made my own kit.1cc/ba,10cc/guaiacol,10cc/bb.4000mg.tren,10gram/testprop.the rest oil.total 60cc of preperation,and filtered with a 45um.
now heres the problem-i feel like i got hit with a baseball bat with in hours of inject.
so now im thinkin can i use like dmso with 1cc of preperation?
holycrap that inject hurts.i cant see doin this 4 the next 10wks.

K, I wouldnt have done it like this, but yes its easily doable, at a glance youve made without even adding in tren to the mix propionate at 160 - 170mg /ml which I wouldve said is excessive, your next issue will the the sheer amount of solvents youve used, I can appreciate guaiacol in part acts as a local anesthetic. Simply put a high concentration will cause more pain, (Im sorry I dont know how competent you are at home chemistry)

If I was to do this I wouldve stuck to a simple 2/20 and decided on a reasonable concentration before I started say 150 mg/ml 100prop and 50 tren (again I dont know the ester of the trenbolone) For the amount of hormone you have this would require about 60cc of oil alone.


Take your prop and tren hormone, put it all in your beaker, add a 2/20 % solvent mix, 4cc of Benzyl Alc, and 16 cc of Benzyl Benzo, I disagree with Guauicol due to the simplicity of the mix, this wont dissolve straight away so dont worry, add the oil, your choice I prefer sesame, due to rumoured problems with cottonseed. (add oil up to 80ml mark) I then put this in the oven in the pyrex dish etc and heat to around 230F this will not harm a hormone but will help it dissolve no end. Let this cool before filtering as most filters will just rip through with this, when cool filter straight into your sterile container. Leave for a couple of days to make sure your mix doesnt crash.

Dont put it in the firdge or anything like that as you risk decreasing the effectivness of the solvents in solution. Keep out of sunlight however.

This will leave you with 2 grams of test prop hormone left.

 

[redneckrz]

thanx 4 your input,but im enterested in transdermal now.i guess ill find out if it works now with dmso.

 

[Fartdaemon]

I could be mistaken, but from what I understand you cannot make a transdermal from esterfied gear(Test Prop and Tren aectate). Has to be Test base, Tren base, Nadrolone Base etc

 

[tap]

Thats alot of guaiacol.you can use dmso but your breath will smell likea horses ass, but if you dont mind the smell you can rub the oil in good on a particular area then rub in the dmso .i would start with about a 50/5o mix of dmso and water as it can be irritable to skin, but if it was me i would just cut with oil and shoot because the absortion is only about 30-40% .

 

[dolf]

try cutting it by adding ina cc of say eq for the extra oil. sometimes that works for me if i make it with too much ba

 

[redneckrz]

heres what im gonna do

after everyone comments [i appriciate]ive decided to make my total volume
100cc.by doing this the prop will be 100mg/ml.but the tren to low,so im gonna add 2grm tren which will disolve in all the solvent i put in there and this will give me 60mg/ml.the 40 extra cc is oil.
hope this works better in my experament on those cows.!!!!!!!!!!