Diethyl Either and Synovex h conversion

[steve123456789]

Anyone ever use this method to remove the majority of estrodial from Synovex H. It makes sense from a chemistry point. Many labs use this method to remove chemicals from eachother.

 

[steve123456789]

Answered my own question by using the search feature

I used the Search feature for the words " diethyl either" and a thread showed up by a member here named Mcdaddy. I also did some searching on other bodybuilding sites. It appears that if you crush up the synovex pellets and put them in a glass container of diethyl either for two days there will be test prop and filler at the botton and a thin white coating of estrogen crystals at the top of the freezing either. You simply scrape off the top layer of estrogen and then allow the either to evaporate and you have Test Prop plus the binders. You then make it that same as Fina for the amount of grams you have . I was told it didn't get all the estrogen but most of it. I will try it and report back. I figure in a 5 cart kit I should have 1 gram of white estrogen powder from the top of the either and 10 grams test prop once i separate the binders. I ususally use the method on www.universalkits.com see the directions for fina kits. You can do this with any brand kit by the way. If anyone has any forst hand info then great.

 

[Macdaddy]

This rout is just not worth it anymore. Too easy and cheap to get pure powder now a days. This method is very tricky compared to your average conversion. Check out some of the board sponsors. They have some good deals on 10g of Prop. Very easy to put into solution too.

Mac

 

[tap]

I used the Search feature for the words " diethyl either" and a thread showed up by a member here named Mcdaddy. I also did some searching on other bodybuilding sites. It appears that if you crush up the synovex pellets and put them in a glass container of diethyl either for two days there will be test prop and filler at the botton and a thin white coating of estrogen crystals at the top of the freezing either. You simply scrape off the top layer of estrogen and then allow the either to evaporate and you have Test Prop plus the binders. You then make it that same as Fina for the amount of grams you have . I was told it didn't get all the estrogen but most of it. I will try it and report back. I figure in a 5 cart kit I should have 1 gram of white estrogen powder from the top of the either and 10 grams test prop once i separate the binders. I ususally use the method on www.universalkits.com see the directions for fina kits. You can do this with any brand kit by the way. If anyone has any forst hand info then great.

Synovex conv. are much more time consuming and tedious than fina conversions. Ive done them both a few years back and the prop just wasnt worth the trouble.Also its tough to get all the estrogen out so have some nolva on hand.Mac d is right , check out the board sponsers.Vet suppliers keep records of fina & syno sales so its probably just as risky either way.

 

[Massive G]

The di-ethyl ether method doesn't work.

 

[Ashop]

Anyone ever use this method to remove the majority of estrodial from Synovex H. It makes sense from a chemistry point. Many labs use this method to remove chemicals from eachother.

seems like alot work when MANY test props are easily readily available.

 

[Big Danny]

Would it be too complicated to me, when the other options are cheaper and safer.

 

[fatsuperman]

super saturation selective recrystalization works!

basically you harvest the crystals from the pellets test estrogen an all dry them.

You saturate them with the minimum amount of methyl alcohol that gets them to go into solution, then you add water drip wise till you get large crystals. filter the crystals, dry them repeat.

You do this 2 or 3 times (its like distilling) the more you do it the purer they become, anyway after 3 times you pretty much have the estrogen out.

Too bad it takes weeks to do this right, and you only get around 10 grams out of a 20 gram cart.

Screw that crap!!! just order 2 years worth of test prop from one of the board sponsers. I suggest purui from personal experience! Don't worry he's safe!

 

[terryd5150]

My question is this:

Why bother?

Did you get a new chemistry set for Christmas and just have to find a way to use it?

 

[steve123456789]

I'll give one of the sponsers a try.

I basically got ripped off a few times in the past 3-4 years ago and that is why I went to Cattle implants. I also don't want a criminal record (I don't want to sign for packages and want power to convert for economy).However I am sick of injesting evey day or every other day. I feel like a voodoo doll.
I did a little price comparison on the China suppliers of powders from thier posts on the forum. The price of Test Enth or Test CYP per gram is about 1/4 the price I am paying for implants. the Tren Enth is 1/2 the price per gram i am paying for implants. The only hitch is the western union feels and shipping fees depending where i order from and the amount.
It is a pain (really) to be injesting evey day (ouch). I hope I can find a place where I don't have to sign. Better yet , I wish there were domestic powder suppliers . I see Domestic Oil resellers but not Powders?