Don't know if this works but I found this on a site about How to Make Bacteriostatic Water. Maybe someone else can give you more solid advice and I would confirm this with someone much more knowledgeable in this area other than myself. Good luck bro.
No need to boil water, but use distilled water or water that has gone through reverse
osmosis, then filter into sterile bottle through filter.
Use a 0.22 syringe filter which will do 100ml of water.
Be sure to add 1ml of sterile BA for every 99ml of water.
If you do not know what this is for, don worry about it.
Items needed:
.22 sterile filter
1ml sterile BA(ask if there is a minimum)
100ml sterile vial
20ml syringe
two 18g pins one for drawing water and one for injecting in sterile vial.
the pin used for injecting into the sterile vial should stay there with the filter until the process is complete. use the other pin to draw the water with. You will be switching the syringe from the filter to the drawing 5 times or so to get 100ml.
you should put a small pin like 23g or smaller into the rubber stopper to relieve air pressure in the vial
there is one problem with this...its not listed on all the bottles of bact water but they add stuff to balance the ph of it...not just water and benzyl alcohol....i dont know if the ph being off a little is detrimental to the hcg etc but just better off getting the bottle premade if at all possible
what can i substitute?
cant get bac water or anything shipped long story
is there anything?
In my part of the world bac water is illegal to sell so guys tell me they use contact lens solution or eye drops with peptides.
why dont you use witch hazel?
Don't know if this works but I found this on a site about How to Make Bacteriostatic Water. Maybe someone else can give you more solid advice and I would confirm this with someone much more knowledgeable in this area other than myself. Good luck bro.
No need to boil water, but use distilled water or water that has gone through reverse
osmosis, then filter into sterile bottle through filter.
Use a 0.22 syringe filter which will do 100ml of water.
Be sure to add 1ml of sterile BA for every 99ml of water.
If you do not know what this is for, don worry about it.
Items needed:
.22 sterile filter
1ml sterile BA(ask if there is a minimum)
100ml sterile vial
20ml syringe
two 18g pins one for drawing water and one for injecting in sterile vial.
the pin used for injecting into the sterile vial should stay there with the filter until the process is complete. use the other pin to draw the water with. You will be switching the syringe from the filter to the drawing 5 times or so to get 100ml.
you should put a small pin like 23g or smaller into the rubber stopper to relieve air pressure in the vial