Fina/Tren Ace Recipe

[Vo2Max]

I have read many conversion recipes on other sites for fina. But my objective is to convert my fina to a 200mg/ml solution without a ready made kit. I have all the materials necessary, Im just unclear about the amounts of BA/BB for my solution. If any fina masters can give me a link or a quality recipe I would greatly appreciate it.

 

[Trenman]

I used to use 4 ml of BA to dissolve 2 grams worth of pellets, then add the oil. However, to get a 200mg/ml solution, you would be adding such a small amount of oil/BB, that the concentration of BA will be through the roof. Would come out to 40% BA!

I eventually started using Methanol to first extract the TA from the filler. You lose 25% of the Tren, but the end result is a rather pure TA powder, with almost no filler in it. That way, loads of BA are not needed. I end up with a painless 200mg/ml shot using Ethyl Oleate and 20% BB, and only 2% BA.

 

[cpesloco]

goto anabolex and look in the home chem forum. great info there.

your BA 3% and BB 12% will work for a 24 hour dissolve.

 

[snowmann]

Crush the pellets first to a fine powder. Add 5% BA and 20-30% BB (I use 30%BB, less pain for me). Let sit a day or two swirling it around every so often to dissolve the powder. Once dissolved add your oil to make up the missing volume for your total solution, shake, let sit again for sediment to settle. Filter through coffee filter. Then filter solution through whatman into sterile vial. No heat, low pain.

 

[Metal]

6 carts in 60ml of oil is what I typically use, I believe it to be around 125-150mg per ml, and I use a half ml ED; not sure how to compare it because IMO, I dont believe Ive ever used real Tren until I made it myself. I dont know if some of these shops have underdosed or just not the real deal, but Tren is one of those AAS that u know what it does when it works right. I used 2 carts of pellets in 40ml of oil, which is supposed to yeild 75mg per ml, based on 1 cart in 20ml yeilds the same formula.
2%ba, 20%bb regardless of the amount of oil. When crushing the pellets, for me, putting them in a drinking straw, seal both ends, and smack the straw with a hammer or mallet for about 2 minutes, then empty the dust into your plate. Its easy, you ll do fine

 

[Vo2Max]

Thanks

Thanks guys for all the helpful answers. Seems there are many ways to accomplish the end result.

 

[cpesloco]

you guys use a lot of BB. I guess everyones pain is different.