Be careful with your droppers measurments.

[MrCyp]

With liquid research chems, usually in the past i'd just take 1/2 dropper to get 1/2ml but last night I put 1/2dropper in a slin pin and it was almost a full cc. For now on I only recommend using a slin pin with the tip cut off for accurate results or a dropper thats labled, but still test it.

 

[chris250]

yeah, you have to be careful on that stuff...

Im sure most of us are using alot more than we think

 

[bboveri]

Take a syringe and load it to 1ml and then squirt that into the dropper and make your marks.

 

[BossBrutha]

I always measure it out with a pin just for that reason.

 

[MR. BMJ]

Not to question or insult your intelligence, but I have to ask, what 'slin pin are you using? Is it the U100?

There is a 1/2-ml and a 1-ml slin pin that is commonly used. Does your's say 50 or 100 units?

BMJ

 

[617ricky]

If it measured out to a full cc it has to be the 100 unit stick.

 

[MrCyp]

Not to question or insult your intelligence, but I have to ask, what 'slin pin are you using? Is it the U100?

There is a 1/2-ml and a 1-ml slin pin that is commonly used. Does your's say 50 or 100 units?

BMJ

With most research chems your fine with a regular 1cc U100 syringe. Maybe if using clen/t3 or products with finer measurements you can use a 1/2cc slin pin.