Conversion ?'s

[Armageddon]

I've emailed some people and have yet to get help, plus I've looked around and don't really see any clear cut answers for what I need. And at the price of things these days there is no room for error so to say. Were can I find info for conversions? Does anyone already have the math laid out? If someone could point me in the proper direction that would be great.
I've talked with Animal about this, and even though his products are great the NA or whatever that he suggested seems to more than double the conversion cost of what I had in mind.

 

[bigdho]

You have a PM!

 

[xcelbeyond]

I think there's plenty of people here that can help. Your question/point is very general and one answer/formula doesn't "fit all."

 

[Armageddon]

Xcel I understand it being general, I just want to make sure someone can help before I start putting out numbers and what not. Besides I wanted alittle bit of privacy on this matter as far as what might be done. But it doesn't matter as this is all hypothetical and would never take place cause Armageddon doesn't do anything that our beloved government don't want him to do!
So with that this is what I'm curious to see converted.
100g prop @ 100mg/ml
50g Eq @ 300mg/ml
100g Cyp @ 300mg/ml
That is alittle less vague

 

[StoryOfTheYear]

Im also curious about the 100g prop conversion in particular

 

[StoryOfTheYear]

For my research purposes of course !

 

[bigdho]

Xcel I understand it being general, I just want to make sure someone can help before I start putting out numbers and what not. Besides I wanted alittle bit of privacy on this matter as far as what might be done. But it doesn't matter as this is all hypothetical and would never take place cause Armageddon doesn't do anything that our beloved government don't want him to do!
So with that this is what I'm curious to see converted.
100g prop @ 100mg/ml
50g Eq @ 300mg/ml
100g Cyp @ 300mg/ml
That is alittle less vague

DAMN thats a LOT of gear!

 

[G.E.R.M]

Xcel I understand it being general, I just want to make sure someone can help before I start putting out numbers and what not. Besides I wanted alittle bit of privacy on this matter as far as what might be done. But it doesn't matter as this is all hypothetical and would never take place cause Armageddon doesn't do anything that our beloved government don't want him to do!
So with that this is what I'm curious to see converted.
100g prop @ 100mg/ml
50g Eq @ 300mg/ml
100g Cyp @ 300mg/ml
That is alittle less vague

all 3 are very easy and require no tweaking...

 

[yardrock]

I am interesed in he same. Just placed my first order for powder.

 

[Ashop]

http://absinth.greatnow.com/calcpowder2.html
www.basskilleronline.com

 

[rAJJIN]

xxxxxxxxxxx

 

[flexmaster]

xxx

 

[G.E.R.M]

..

i always use eagle resaearches super oil...

it put my cyp over 300mg/ml back when i did it..

 

[Armageddon]

Thanks for the help guys.

 

[Armageddon]

Like I said before that there's really no room for error on this, so I thought I'd run these numbers by you. As to double check.

Prop @ 100mg/ml: 4% ba & 15% bb were looking at 725 ml of oil, 50ml ba and 150ml of bb.

Eq @ 300mg/ml: 123.67ml oil, 5ml ba and were good to go?

Cyp @ 250mg/ml: 4%ba & 20%bb were at 229ml oil, 16ml ba, and 80ml bb

Sorry for being redundant, but I want all of this correct.
What is the actual procedure for each one. Or do you do all of them like it's fina. Or do I just mix everything together, heat/bake then filter?

 

[mike1107]

Like I said before that there's really no room for error on this, so I thought I'd run these numbers by you. As to double check.

Prop @ 100mg/ml: 4% ba & 15% bb were looking at 725 ml of oil, 50ml ba and 150ml of bb.

Eq @ 300mg/ml: 123.67ml oil, 5ml ba and were good to go?

Cyp @ 250mg/ml: 4%ba & 20%bb were at 229ml oil, 16ml ba, and 80ml bb

Sorry for being redundant, but I want all of this correct.
What is the actual procedure for each one. Or do you do all of them like it's fina. Or do I just mix everything together, heat/bake then filter?

I'd put 20% BB with the prop

I mix a few ml of oil with powder , heat, filter and add the oil until I reach the volume I want