Powder Conversion - Is It This Easy ?

yardrock · Feb 21, 2006

Want to be sure before I begin. I have 50 grams of Tes E that I want to convert into 250mg x 200ml. Is the following the correct amounts:
50grams/powder, 160ml/oil, 10ml/BA and 30ml/BB. Bake and filter.
Also have 10 grams of Tren. Want 100mg X 100ml. Is 75ml/oil , 5ml/BA and 15ml/BB correct??
Thanks

swol · Feb 21, 2006

This is what a "friend" uses when making it:

ba%3
bb%10

so to make 250ml @ 200 mg/ml
oil.........180ml
powder.....50g
BA..........7.5ml
BB...........25ml

yardrock · Feb 21, 2006

swol said:
This is what a "friend" uses when making it:

ba%3
bb%10

so to make 250ml @ 200 mg/ml
oil.........180ml
powder.....50g
BA..........7.5ml
BB...........25ml

Thanks Swol. Do I use same percentages for the Tren, 3% BA and 10% BB?
And ow does your "friend" covert 20 grams of Stanozole(winny) into
200ml @ 100m/ml. Water based??

Wolfpack · Feb 21, 2006

If he's making test e @250mg/ml with a total of 200mL it should something like this:
Oil-136.5 mL
Powder-50 grams
BA-6 mL
BB-20 mL

yardrock · Feb 21, 2006

I my research on this point. a reading that some do not use BB just BA.What is the diff?

yardrock · Feb 21, 2006

Wolfpack said:
If he's making test e @250mg/ml with a total of 200mL it should something like this:
Oil-136.5 mL
Powder-50 grams
BA-6 mL
BB-20 mL

That would be more exact for 3% BA and 10% BB
Thanks

Wolfpack · Feb 21, 2006

yardrock said:
That would be more exact for 3% BA and 10% BB
Thanks

You can use this calculator to figure everything out:
http://absinth.greatnow.com/calcpowder2.html

yardrock · Feb 21, 2006

Wolfpack said:
You can use this calculator to figure everything out:
http://absinth.greatnow.com/calcpowder2.html

Calculator is awesome,thanks. Can you tell me should BA be 3% or 5% and should use BB or just stick with BA? Calculator is pre set at BA 5% and 0% BB?

Wolfpack · Feb 21, 2006

yardrock said:
Calculator is awesome,thanks. Can you tell me should BA be 3% or 5% and should use BB or just stick with BA? Calculator is pre set at BA 5% and 0% BB?

You can change the preset amount of BA on the calculator. Some will use both BA & BB, but you can use just BA. If you're using just the BA for test e, then use 5%. Pm me if you need more info or another site that helps.

swol · Feb 21, 2006

Ya he does "he" has a kick ass one for winn. let me fig it out for 20 grams opps i mean let me ask him for 20 gram conversion.......brb....ok well first off i think 100mg/ml is to high "he" does 50mg/ml. to make it you will need peg 300 or 400. Distilled water and that is it!!!!
"oral only" you can make it inject able but y same diff.

1.take 40ml of peg place in beaker and add ur 10g of winn. "do it this way that way if you mess up u will still have some left ova..but this is kinda fool proof."

2.Heat slowly till all crystals have melted. Will look like a milky solution.

3. let solution cool a lil but

4.Now add your distilled water. Don’t just dump it all in there put it in slowly. As you are putting the water the solution might/will get real clumpy and thick this is fine juts keep adding the water. When finished you will have a beautiful suspended strol solution.

This will make you 200 ml at 50mg/ml

Gorrilla Man · Feb 22, 2006

yardrock said:
Want to be sure before I begin. I have 50 grams of Tes E that I want to convert into 250mg x 200ml. Is the following the correct amounts:
50grams/powder, 160ml/oil, 10ml/BA and 30ml/BB. Bake and filter.
Also have 10 grams of Tren. Want 100mg X 100ml. Is 75ml/oil , 5ml/BA and 15ml/BB correct??
Thanks

There's no need for BB with test E. Only Test Cyp. Test E will go into a solution at 1% Ba and hold with no problems even at 500mgs per Ml.

yardrock · Feb 22, 2006

Gorrilla Man said:
There's no need for BB with test E. Only Test Cyp. Test E will go into a solution at 1% Ba and hold with no problems even at 500mgs per Ml.

So i could put 50 gramsTest E powder into only 2ml of BA and it will desolve?

Wolfpack · Feb 22, 2006

yardrock said:
So i could put 50 gramsTest E powder into only 2ml of BA and it will desolve?

If it's for the 200mL of test e @250mg/mL you'll need 10mL of BA (5%).

swol · Feb 22, 2006

this is true about the bb....but using only 1% of ba is not safe! We dont have a lab to make this stuff...another reasoni use 10 % bb to thin the soulution. I like to use 25g pinzzz so....

xcelbeyond · Feb 22, 2006

I would use 5% BA and 15% BB. I just made 200 mg/ml cyp and used 5% and 20% and it was probably overkill but is still painless.

You could nearly suspend enanthate in just oil but need the BA and BB for other reasons. Sounds like you don't have BB on hand. It's good to keep on hand for other projects also

xcelbeyond · Feb 22, 2006

You don't need to bake it prior to filtering. You can "warm" it up (so you can still hold it bare handed) prior to filtering - makes it easier. You can bake/cool after it's in the vials as an "added" measure.