how do you know conversion worked?

[lucian]

how do you kow the finna conversion worked when your done? tase? smell? color? texture? i didnt get the cough. but maybe i didnt take enough of a dose. whats the max tren dose at one time thats ok to take?
thanks for your help bros
lucian

 

[xcelbeyond]

If you've never used it before, 75mg EOD should be PLENTY.

How do "you" tell any 'roid is working? It takes about 2 weeks before I can tell any benefits/sides from Tren.

 

[Coopie]

Look for a nice "golden" color and smooth, even texture.

When you're filtering into final solution be certain to get the last few drops of fina out of the "gunk". I let it sit overnight and find I have a nice thin film of fina sitting atop the gunk by morning even after I think I've gotten it all.

You may want to start at 75mg EOD, I've gone up to 125 EOD and been very happy with the results.

Depending on which kit you've got, it's easy to withdraw a set amount of oil before hte last step in order to fine tune your MG/ML ratio.

Good luck.

 

[HUTCH]

how do you kow the finna conversion worked when your done? tase? smell? color? texture? i didnt get the cough. but maybe i didnt take enough of a dose. whats the max tren dose at one time thats ok to take?
thanks for your help bros
lucian

Once the Tren gets in your system about 2 weeks then you should start getting the cough. That what happend with me..It sucks though and I dont look forward to it again...

 

[big_byrd52]

if u got the sludge in the bottom then u extracted the fina. U wont always get the cough. i think it has to do with the amount of heat used. If u dont use alot of heat u will get a soft gold color and no cough. the more heat, the darker the color, more golden to brown.

 

[Crowler]

Cough or no cough doesn't tell you if it is legit or not.


You made it yourself unless you screwed it up pretty bad than yes you have tren.



CROWLER

 

[bigbadasian]

Reply

|--[\\\]>--------- You know you got s'thing good when all your lifts jump up 50 lbs in a week!

 

[lucian]

problem

my printer messed up n the directions kinda werent right . the only thing i didnt do exact was durring heating the cap was supposed to be on the vial. i heated it uncaped. the solution is brown in color. totaly clear. all the sludge was left ibn the coffie filter. i kept the heat high almost boiling the water and kept the flame on the stove. just didnt have it capped. i thought it would explode. so what do you guys think? tren. or no tren. that is the question.

 

[Coopie]

The more heat the darker the color will be. Sounds fine, and you;re right to heat it uncapped otherwise the expansion of the air in the vial would have caused the cap to either shoot off or the vial to blow.

 

[MikeS]

Cough or no cough doesn't tell you if it is legit or not.


You made it yourself unless you screwed it up pretty bad than yes you have tren.



CROWLER

Yup Im with Crowler and rAJJIN here. Dont worry.